⎝⎛im体育娱乐⎞⎠

Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
share to:
Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Sony products
Drying | Granulation | Mixing | Crushing | Screening | Auxiliary Equipment | Advantage Engineering
success case
Your present position is: ⎝⎛im体育娱乐⎞⎠ > Case
  • Plant extract (ceramic powder, new photovoltaic material) dryer

Plant extract (ceramic powder, new photovoltaic material) dryer

Plant extracts are formed from plants as raw materials. According to the needs of the extracted land, through physical and chemical extraction and separation process, the directional acquisition and concentration of one or more active ingredients in the plant without changing the structure of its active ingredients. The product. According to the different components of the extracted plant, glycosides, acids, polyphenols, polysaccharides, terpenes, flavones, alkaloids, etc. are formed; according to different properties, they can be divided into vegetable oils, extracts, powders, and lenses.
More
Detailed introduction
Plant extracts are formed from plants as raw materials. According to the needs of the extracted land, through physical and chemical extraction and separation process, the directional acquisition and concentration of one or more active ingredients in the plant without changing the structure of its active ingredients. The product. According to the different components of the extracted plant, glycosides, acids, polyphenols, polysaccharides, terpenes, flavones, alkaloids, etc. are formed; according to different properties, they can be divided into vegetable oils, extracts, powders, and lenses.
/system_dntb/upload/5.swf

principle:
After filtering and heating, the air enters the air distributor on the top of the dryer, and the hot air enters the drying chamber uniformly in a spiral shape. The material liquid is sprayed into a very fine mist-like liquid bead by a high-speed centrifugal atomizer (rotation) on the top of the tower body, and contacts with hot air in parallel, and can be dried into a finished product in a very short time. The finished product is continuously output from the bottom of the drying tower and the cyclone, and the exhaust gas is evacuated by the fan.
Features:
● The drying speed is fast, and the surface area of the material liquid is greatly increased after being atomized. In the hot air current, 95% -98% of water can be evaporated in an instant, and the drying time is only a few seconds. It is especially suitable for drying heat-sensitive materials.
● The product has good uniformity, fluidity and solubility, high purity and good quality.
● Simplified production process and convenient operation control. For liquids with a moisture content of 40-60% (special materials can reach 90%), they can be dried into powder products at one time, without crushing and screening after drying, reducing production processes and improving product purity. The product particle size, bulk density, and moisture can be adjusted by changing the operating conditions within a certain range, and the control and management are very convenient.

Technical figures:

Item / parameter Model: LPG
5 25 50 100 150 200-2000
Inlet temperature ℃ 140 ~ 350 automatic control
Outlet temperature ℃ ~ 80-90
Maximum evaporation of water kg / h 5 25 50 100 150 200-2000
Centrifugal spray head rotation form Compressed air transmission Mechanical transmission
Speed (rpm) 25000 18000 18000 18000 15000 8000-15000
Spray plate diameter (mm) 50 100 120 140 150 180-340
Heat source Electricity Electricity + steam Electricity + steam, fuel, gas Solved by the user
Electric heating power KW 9 36 63 81 99  
Length × Width × Height (m) 1.8 × 0.93 × 2.2 3 × 2.7 × 4.26 3.7 × 3.2 × 5.1 4.6 × 4.2 × 6 5.5 × 4.5 × 7 Determined on a case-by-case basis
Dry powder recovery rate% ≥95 ≥95 ≥95 ≥95 ≥95 ≥95
Note: Some parameters are adjusted according to different materials during design, and the design shall prevail.
related pictures:
⎝⎛im体育娱乐⎞⎠ | About Us | News Center | Product Center | Project Cases | Customer Service | Technical Center | Recruitment | Contact Us | Site Map
Copyright @ 2014Changzhou Xinli Drying Equipment Co., Ltd. All Rights Reserved. Technical Support: Changzhou Cloud Computing | 苏 ICP 备 ******** 号 -1
Address: Jiaoxi Town, Changzhou City, Jiangsu Province Telephone: 0519-88900288 Fax: 0519-88901908 Contact: Mr. Fan 13775296688 Email: market@cz263.com
Links:
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册