⎝⎛im体育娱乐⎞⎠

Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
share to:
Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Sony products
Drying | Granulation | Mixing | Crushing | Screening | Auxiliary Equipment | Advantage Engineering
Product center
Your present position is: ⎝⎛im体育娱乐⎞⎠ > Products
  • DW series single layer belt dryer
  • DW series single layer belt dryer
  • DW series single layer belt dryer
  • DW series single layer belt dryer
  • DW series single layer belt dryer
  • DW series single layer belt dryer

DW series single layer belt dryer

This machine is a continuous flow drying device for drying sheet, strip, and granular materials with good air permeability. It is especially suitable for materials with high moisture content such as dehydrated vegetables, Chinese medicine decoction pieces and high temperature. ; This series of dryers have the advantages of fast drying speed, high evaporation strength and good product quality. The dehydrated cake-like paste-like materials can be dried after being granulated or made into rods.
share to:
Detailed introduction

product description
This machine is a continuous flow drying device for drying sheet, strip, and granular materials with good air permeability. It is especially suitable for materials with high moisture content such as dehydrated vegetables, Chinese medicine decoction pieces and high temperature. ; This series of dryers have the advantages of fast drying speed, high evaporation strength and good product quality. The dehydrated cake-like paste-like materials can be dried after being granulated or made into rods.
The company has cooperated with Beijing Enfei, Nanchang Ruilin and other design institutes to develop copper-based anode mud non-standard belt dryers, which have been used by Jinchuan Company, Baiyin Company and other units with good results.
working principle
The material is evenly spread on the mesh belt by the feeder. The mesh belt generally adopts 12-60 mesh stainless steel wire mesh and is dragged by the transmission device to move in the dryer. The dryer is composed of several units. Each unit circulates hot air independently. Part of the exhaust gas is discharged by a special dehumidification fan. The exhaust gas is controlled by a regulating valve. The process of mass transfer takes away material moisture. The mesh belt moves slowly, and the running speed can be adjusted freely according to the temperature of the material. The upper and lower circulation units can be flexibly equipped according to user needs, and the number of units can also be selected according to needs.
Application range
Dehydrated vegetables, pellet feed, monosodium glutamate, coconut, organic pigments, synthetic rubber, acrylic fibers, medicines, medicinal materials, small wooden products, plastic products, electronic component aging, curing, etc.
Features

Can adjust the air volume, heating temperature, material residence time and feeding speed to obtain the best drying effect.
Equipment configuration is flexible, can use mesh belt washing system and material cooling system.
Most of the air is recycled, saving energy.
The unique air distribution device makes the hot air distribution more uniform and ensures the consistency of product quality.
The heat source can be matched with steam, thermal oil, electricity or coal (oil) hot air stove


Technical Parameters

model

DW-1.2-8

DW-1.2-10

DW-1.6-8

DW-1.6-10

DW-2-8

DW-2-10

DW-2-20

Number of units

4

5

4

5

4

5

10

Bandwidth (m)

1.2

1.6

2

Length of drying section (m)

8

10

8

10

8

10

20

Paving thickness (mm)

≤60

) Use temperature ( )

50-140

Steam pressure (MPa)

0.2-0.8

Steam consumption (kg / h)

120-300

150-375

150-375

170-470

180-500

225-600

450-1200

Drying time (h)

0.2-1.2

0.25-1.5

0.2-1.2

0.25-1.5

0.2-1.2

0.25-1.5

0.5-3

Drying strength (kg / h)

60-160

80-220

75-220

95-250

100-260

120-300

240-600

Total equipment power (kw)

11.4

13.6

11.4

13.6

14.7

15.8

36.8

Dimensions

L (m)

9.56

11.56

9.56

11.56

9.56

11.56

21.56

W (m)

1.49

1.49

1.9

1.9

2.32

2.32

2.32

H (m)

2.3

2.3

2.4

2.4

2.5

2.5

2.5

Weight (kg)

4500

5600

5300

6400

6200

7500

14000

related pictures:
⎝⎛im体育娱乐⎞⎠ | About Us | News Center | Products Center | Project Cases | Customer Service | Technical Center | Recruitment | Contact Us | Site Map
Copyright @ 2014Changzhou Xinli Drying Equipment Co., Ltd. All Rights Reserved. Technical Support: Changzhou Cloud Computing | 苏 ICP 备 ******** 号 -1
Address: Jiaoxi Town, Changzhou City, Jiangsu Province Telephone: 0519-88900288 Fax: 0519-88901908 Contact: Mr. Fan 13775296688 Email: market@cz263.com
Links:
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册