⎝⎛im体育娱乐⎞⎠

Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
share to:
Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Xinli Drying, <a href=http://cz263.com> Drying equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Sony products
Drying | Granulation | Mixing | Crushing | Screening | Auxiliary Equipment | Advantage Engineering
Product center
Your present position is: ⎝⎛im体育娱乐⎞⎠ > Products
  • WLDH series horizontal ribbon mixer
  • WLDH series horizontal ribbon mixer
  • WLDH series horizontal ribbon mixer
  • WLDH series horizontal ribbon mixer
  • WLDH series horizontal ribbon mixer
  • WLDH series horizontal ribbon mixer

WLDH series horizontal ribbon mixer

Horizontal ribbon mixer is applied to solid-solid (i.e. powder and powder) solid-liquid (i.e. powder and glue liquid) of dry powder mortar, putty powder, chemicals, putty paste, real stone paint, ceramics, refractory materials, etc. Mixing, can also stir pasty, viscous or heavier materials.
share to:
Detailed introduction
Working principle of horizontal ribbon mixer
The horizontal screw belt mixer is driven by the inner and outer diameter spirals installed on the stirring shaft to turn the material in the barrel, so that the mixer can turn the animal in the barrel to the maximum extent. In the structure of the stirrer, the spiral is designed to be reverse spirals inside and outside, and the left and right are reverse spirals. When the stirrer works, the inner spiral drives the material near the axis to rotate the axis, and the axial direction is pushed from the inside to the sides. The axis rotates, and the axial direction pushes from both sides to the inside, so that the materials are convected in the cylinder, sheared and mixed, and the materials are quickly and uniformly mixed in a short time.
Introduction of Horizontal Ribbon Mixer

  • Under the feasibility factor, the mixing effect of the horizontal ribbon mixer is not affected by the size and density of the particles, and it also has a good mixing effect for viscous materials.
  • The stable mixing process reduces the damage to the fragile materials, and the installation of the flying knife structure also plays a role in crushing.
  • The horizontal structure has a low body height for easy installation.
  • In the stirring structure, the forward and reverse rotating spiral bars are installed on the same horizontal axis, forming a low-power and efficient mixing environment.
  • The horizontal ribbon mixer is mainly used for the production of putty powder, and can also be used as an entry-level thermal insulation mortar mixer.

Technical parameters of horizontal ribbon mixer:

model

Motor power kw

Full volume M 3

Spindle speed r / min

Mixing weight kg

Dimensions

equipment weight

WLD-0.5

5.5

0.5

63

150 ~ 350

2372 * 812 * 1272

1050kg

WLD-1.0

11

1.0

43

300 ~ 700

2700 * 1036 * 1574

1760Kg

WLD-2.0

15

2.0

33

600 ~ 1400

3356 * 1236 * 1774

2500Kg

WLD-3.0

18.5

3.0

33

900-2100

3356 * 1336 * 2024

3400Kg

WLD-4.0

twenty two

4.0

33

1200-2800

4210 * 1414 * 2108

4200Kg

Note :
* The mixing amount in the table is measured with powder with a specific gravity of 1 as the medium. The selection of the horizontal ribbon mixer should be calculated according to the mesh number and specific gravity of the material.
* If there are high temperature, high pressure, flammable, explosive, corrosive and other working conditions, detailed data must be provided in order to select and customize separately.
* The data in this table is subject to change without notice. The correct parameters are subject to the actual horizontal ribbon mixer provided.
* This table cannot include all equipment information, please contact our sales engineers for more information.

Function selection of horizontal ribbon mixer :

  1. Discharging method : manual electric pneumatic
  2. Spindle sealing method : packing seal packing + air seal mechanical seal
  3. Stirrer form : two-way continuous ribbon, one-way continuous ribbon, two-way disconnected ribbon, one-way disconnected ribbon
  4. Drive method : Direct-connected split type (belt / chain)
  5. Mixer material : carbon steel Material contact stainless steel (SS304 / SS316) All stainless steel (SS304 / SS316) Internal coating
  6. Spindle : single-stage multi-stage
  7. Cylinder opening : standard flange port, quick opening feed port, dust collector port, manual feed port, sideways cleaning door
  8. Discharge valve : butterfly valve ball valve plum valve flap valve
  9. Others : liquid spray / spray heating / cooling dust removal / vacuum temporary sampling
related pictures:
⎝⎛im体育娱乐⎞⎠ | About Us | News Center | Products Center | Project Cases | Customer Service | Technical Center | Recruitment | Contact Us | Site Map
Copyright @ 2014Changzhou Xinli Drying Equipment Co., Ltd. All Rights Reserved. Technical Support: Changzhou Cloud Computing | 苏 ICP 备 ******** 号 -1
Address: Jiaoxi Town, Changzhou City, Jiangsu Province Telephone: 0519-88900288 Fax: 0519-88901908 Contact: Mr. Fan 13775296688 Email: market@cz263.com
Links:
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册