GFG series high-efficiency boiling dryer
The fluidized bed has a round structure to avoid dead corners.
The hopper is set to stir to avoid the agglomeration of wet materials and the formation of ditch flow when drying.
It is convenient, quick and thorough to adopt turnover unloading. It can also design automatic feeding and discharging system according to requirements.
Sealed negative pressure operation, air flow is filtered. Easy to operate and easy to clean, it is the ideal equipment to meet the requirements of "GMP".
The drying speed is fast and the temperature is uniform. The drying time of each batch is generally 20-30 minutes.
After the air is purified by heating, it is introduced from the lower part by the induced draft fan and passes through the mesh plate of the hopper. In the working room, fluidization is formed by the action of stirring and negative pressure. After the water quickly evaporates, it is taken away by the exhaust, and the material is quickly dried.
Mechanism screw extruded granules, swing granules, wet high speed mixed granulation granules.
Dry wet granules and powder materials in medicine, food, feed, chemical and other fields.
Large particles, small lumps, sticky lumpy materials.
Konjac and other materials that change volume when dried.
3 /h） Air volume (m 3 / h)
2 O） Wind pressure (H 2 O)
Mixing power (kw)
Stirring speed (rpm)
Steam consumption (kg / h)
Operating time (min)
15-30 (depending on the specific material)