⎝⎛im体育娱乐⎞⎠

Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
share to:
Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Xinli Drying, <a href=http://cz263.com> Drying Equipment </a>, Changzhou Xinli <a href=http://cz263.com> Drying Equipment </a> Co., Ltd.
Sony products
Drying | Granulation | Mixing | Crushing | Screening | Auxiliary Equipment | Advantage Engineering
Product center
Your present position is: ⎝⎛im体育娱乐⎞⎠ > Products
  • Molybdenum powder, inorganic salt dryer

Molybdenum powder, inorganic salt dryer

The disc type continuous dryer is a highly efficient conductive continuous dryer . Its unique structure and working principle determine that it has the characteristics of high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation and control, and good operating environment. It is widely used in chemicals, medicine, pesticides, food, feed, agriculture, etc. Drying operations in industries such as by-product processing. It has been well received in various industries. Now producing three types of atmospheric pressure, airtight, vacuum, 1200, 1500, 2200, 3000, A (carbon steel), B (parts in contact with the material are evenly distributed stainless steel), C (on the basis of B, additional steam pipes The road, main shaft and bracket are made of stainless steel, and the cylinder and cover are lined with stainless steel). There are three kinds of materials, with a drying area of 4 to 180 square meters. There are hundreds of models of series products, and can provide a variety of auxiliary equipment to meet the needs of users to dry various materials.
share to:
Detailed introduction

product description
The disc type continuous dryer is a highly efficient conductive continuous dryer . Its unique structure and working principle determine that it has the characteristics of high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation and control, and good operating environment. It is widely used in chemicals, medicine, pesticides, food, feed, agriculture, etc. Drying operations in industries such as by-product processing. It has been well received in various industries. Now producing three types of atmospheric pressure, airtight, vacuum, 1200, 1500, 2200, 3000, A (carbon steel), B (parts in contact with the material are evenly distributed stainless steel), C (on the basis of B, additional steam pipes The road, main shaft and bracket are made of stainless steel, and the cylinder and cover are lined with stainless steel). There are three kinds of materials, with a drying area of 4 to 180 square meters. There are hundreds of models of series products, and can provide a variety of auxiliary equipment to meet the needs of users to dry various materials.
working principle
Wet material is continuously added from the feeder to the first layer of the drying plate on the top of the dryer. The rake arm with rake leaves makes a rotary motion, and the rake arm makes a rotary motion to continuously rake the material. The material flows along the surface of the drying plate along the exponential spiral. The material on the small plate is moved to the outer edge and falls to the outer edge of the large drying plate below. The material moves inward on the large plate and falls from the middle. The feed port falls into a small drying pan as shown below. The large and small drying plates are arranged alternately up and down, and the material can continuously flow through the entire dryer. A heating medium is introduced into the hollow drying pan, and the heating medium is in the form of saturated steam, hot water, and heat-conducting oil. The heating medium enters from one end of the drying pan and is led out from the other end. The dried material falls from the last layer of the drying tray to the bottom of the shell, and is finally transferred to the discharge port by the harrow blades for discharge. The moisture escapes from the material and is discharged through the moisture exhaust port provided on the top cover, and the moisture of the vacuum tray dryer is exhausted through the vacuum pump port provided on the top cover. The dry material discharged from the bottom layer can be directly packed. Equipped with auxiliary equipment such as finned heater, solvent recovery condenser, bag type dust collector, dry material back-mixing mechanism, induced draft fan, etc., it can improve its drying production capacity, dry paste and heat-sensitive materials, and can be easily recycled Solvent, and can perform pyrolysis and reaction operations.
Performance characteristics
(1) Easy regulation and strong applicability
◎ By adjusting the thickness of the material layer, the speed of the main shaft, the number of rake arms, the type and size of rake blades, the drying process is optimized.
◎ Each layer of drying tray can be heated or cooled by feeding hot or cold medium separately. The temperature control of the material is accurate and easy.
◎ The residence time of the material can be adjusted precisely.
◎ The flow direction of the material is single, no back-mixing phenomenon, uniform drying, stable quality, and no re-mixing is needed.
(2) Simple and easy operation
◎ The operation of driving and stopping the dryer is very simple.


◎ After stopping the feeding, the rake blades for conveying the material can quickly empty the material in the dryer.
◎ The inside of the equipment can be carefully cleaned and observed through the sight glass of the special large inspection door.
(3) Low energy consumption
◎ The material layer is very thin, the spindle speed is low, the power required for the material transfer system is small, and the power consumption is small.
◎ Drying with conductive heat, high thermal efficiency and low energy consumption.
(4) The operating environment is good, the solvent can be recovered, and the dust emission meets the requirements
◎ Normal pressure type: Due to the low air velocity in the equipment and the high and low humidity distribution in the equipment, it is difficult for the dust to float to the top of the equipment, so the exhaust gas discharged from the top exhaust port contains almost no dust.
◎ Sealed type: Equipped with solvent recovery device, which can easily recover the organic solvents in the moisture-laden gas. The solvent recovery device is simple and has a high recovery rate. For flammable, explosive, toxic and oxidizable materials, nitrogen can be used as a moisture-carrying gas to perform closed-circuit circulation for safe operation. Particularly suitable for drying of flammable, explosive and toxic materials.
◎ Vacuum type: Disk dryer operated under vacuum, especially suitable for drying heat-sensitive materials.
(5) Easy installation and small footprint
◎ The dryer is delivered as a whole and transported as a whole. It only needs to be hoisted in place, and the installation and positioning is very easy.
◎ Due to the drying tray layout and vertical installation, even if the drying area is large, the floor space is also small.
Technical characteristics
(A) drying tray
◎ Design pressure: generally 0.4MPa, maximum 1.6MPa.
◎ Maximum working pressure: generally ≤0.4MPa, the highest can reach 1.6MPa.
◎ Heating medium: steam, hot water, heat transfer oil, hot water when the temperature of the drying pan is 100 ° C, 100 ° C ~ 150 ° C with ≤0.4MPa saturated steam or superheated steam, and 150 ° C ~ 320 ℃ Heating, when it is> 320 ℃, it can be heated by electricity, thermal oil, molten salt, etc.
(Two) material delivery system
◎ Spindle speed: 1 ~ 10 rpm, stepless speed regulation by electromagnetic or frequency conversion.
◎ Harrow arms: There are 2 to 8 rake arms fixed on the main shaft on each layer of drying plate.
◎ Rake blade: It is hinged on the rake arm, and can keep contact with the surface of the disk. There are many forms.
◎ Rolling: For materials that are easy to agglomerate and need to be crushed, rolling in place can strengthen the heat transfer and drying process.
(Three) the shell has three types of normal pressure, closed, vacuum
◎ Atmospheric pressure type: cylindrical or octagonal prism type. The main pipe for heating medium inlet and outlet can be inside the casing or outside the casing.
◎ Sealed type: Cylindrical shell, can withstand 5Kpa internal pressure, the main pipe for heating medium inlet and outlet can be inside or outside the shell.
◎ Vacuum type: Cylindrical shell, the design pressure is 0.1Mpa, the main pipe for heating medium inlet and outlet is inside the shell.
(Four) air heater
Generally used in the case of large evaporation to enhance drying efficiency.
Adapt to the material
Dry pyrolysis combustion cooling reaction sublimation
◎ Organic chemical products ◎ Inorganic chemical products ◎ Medicine and food ◎ Feed and fertilizer
specification Outer diameter mm Height mm Dry area m2 Power Kw
1200/4 Φ1850 2718 3.3 1
1200/6 3138 4.9
1200/8 3558 6.6 1.5
1200/10 3978 8.2
1200/12 4398 9.9 2.2
1500/6 Φ2100 3022 8.0
1500/8 3442 10.7
1500/10 3862 13.4
1500/12 4282 16.1 3.0
1500/14 4702 18.8
1500/16 5122 21.5
2200/6 Φ2900 3319 18.5
2200/8 3739 24.6
2200/10 4159 30.8 4.0
2200/12 4579 36.9
2200/14 4999 43.1 5.5
2200/16 5419 19.3
2200/18 5839 55.4 7.5
2200/20 6259 61.6
2200/22 6679 67.7 11
2200/24 7099 73.9
2200/26 7519 80.0

specification Outer diameter mm Height mm Dry area m2 Power Kw
2500/6 Φ3150 3319 26.3 4
2500/8 3739 35
2500/10 4159 43.8 5.5
2500/12 4579 52.5
2500/14 4999 61.3 7.5
2500/16 5419 70
2500/18 5839 78.8 11
2500/20 6259 87.5
2500/22 6679 96.3
2500/24 7099 105 13
2500/26 7519 113.8
3000/8 Φ3800 4050 48 11
3000/10 4650 60
3000/12 5250 72
3000/14 5850 84
3000/16 6450 96
3000/18 7050 108 13
3000/20 7650 120
3000/22 8250 132
3000/24 8850 144
3000/26 9450 156 15
3000/28 10050 168


related pictures:
⎝⎛im体育娱乐⎞⎠ | About Us | News Center | Products Center | Project Cases | Customer Service | Technical Center | Recruitment | Contact Us | Site Map
Copyright @ 2014Changzhou Xinli Drying Equipment Co., Ltd. All Rights Reserved. Technical Support: Changzhou Cloud Computing | 苏 ICP 备 ******** 号 -1
Address: Jiaoxi Town, Changzhou City, Jiangsu Province Telephone: 0519-88900288 Fax: 0519-88901908 Contact: Mr. Fan 13775296688 Email: market@cz263.com
Links:
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册