QG pulse air dryer
This type of equipment is suitable for more materials. In addition to the materials mentioned in the basic type, there are: hypnone, ABC intermediates, ABS resin, ASC, white carbon, benzyl pyrazolone, tea meal, oxalic acid. Catalyst, accelerator mdm, catalyst, precipitated carbon powder, p-acetylnitrobenzenesulfonamide, p-aminosalicylic acid, permato, terephthalic acid, diethylphenylammonium, titanium dioxide, activated carbon, fluorosilicic acid Sodium, fluorite, by-product ammonium sulfate, silica gel powder, synthetic resin, calcium sulfonate, polypropylene resin, chlortetracycline, sodium pyrosilicate, coffee furochlorate, oral grape bran, sodium sulfate, sulfide , Phosphate rock powder, blue BB, PVC, molten phosphate fertilizer, tetracycline, iron trioxide, calcium carbonate, ilmenite, copper ore, potato flour, tail coal, stearates, zein, medicines, pharmaceuticals, iron oxide, Rosacea, etc.
The fan with dispersing effect is especially suitable for air drying of heat-sensitive materials. The high-speed spinning fan impeller can disintegrate wet or even agglomerated materials until they are dispersed. During the dispersion process, the materials are stirred and mixed at the same time, and then the materials and hot air flow in parallel. This type of equipment is suitable for dry cake cake, but also belongs to the material with surface moisture content, moisture content ≤40%. If the processing capacity is large or the finished product needs to be dried below 15%, secondary airflow drying can be used. . When the moisture content of the material exceeds 40%. However, when ≤60%, the feeding is difficult. A mixer should be used to reduce the feed moisture by mixing dry materials. At this time, the total output of the drying equipment is greatly reduced, which is economical. It is not cost-effective. Therefore, users should first use mechanical methods (centrifugal dehydration or filter press) to reduce the feed water as much as possible to ensure the smooth operation of the drying operation.
Evaporated moisture (kg / h)
Installed power (kw)
2 ) Floor area (m 2 )
Note: * is the secondary drying. The installed power and floor area are calculated by steam heating.